CT-DH-1 Integrated Cooling Thermostat & Dehumidistat/ 4 Outlets

Products > Environmental > Green Air Products Atmospheric Controllers > CT-DH-1 Integrated Cooling Thermostat & Dehumidistat/ 4 Outlets

The CT-DH-1 is designed to turn "On" exhaust and/or intake fans to remove excess or unwanted heat and humidity. Set your desired temperature and humidity using the dials. Internal sensors will allow a 7F temperature comfort zone (3F with an external coil or remote bulb) and a 5% humidity span (differential) between the time the fans activate for cooling or dehumidifying and then turn "Off" again. Plug-in and control circulation fans, exhaust fans, cooling systems, or dehumidifiers. The outlets on the CT-DH-1 are integrated, so that when either the temperature or humidity settings are exceeded, all four will activate, turning "On" equipment plugged into any of the four outlets.

The CT-DH-1 operates on 120 Volt AC with 15 Amp maximum switching capacity and is intended for indoor use only. Be sure to locate your atmospheric controller where it will accurately sample and respond to the average air conditions. Good air circulation around the controller and in your garden space is essential. Avoid locating the controller in a draft or in direct sunlight.

Item Specifications
Part Number: 131219
Universal Product Code: 741559010026
Dimensional Weight: 5 lbs

Related Items

CT-DH-2 Independent Cooling Thermostat & Dehumidistat/ 4 Outlets The CT-DH-2 is also designed to turn "On" cooling and dehumidifying equipment to remove excess heat and humidity. However, the CT-DH-2 offers you independent outlets for heating or cooling. The left outlets activate when temperature exceeds your set point... More Details
Price: $190.00

CT-DH-3 Synchronized Cooling Thermostat/ Dehumidistat/ 4 Outlets While the CT-DH-3 has many applications, it was primarily developed for use with CO2 equipment and exhaust/ventilation fans. The left side (or equipment) outlets of the controller are normally "ON" until defeated when the right side outlets are activated.... More Details
Price: $190.00

CT-DH-3P Synchronized Cooling Thermostat/ Dehumidistat w Photosensor/ 4 Outlets While the CT-DH-3 has many applications, it was primarily developed for use with CO2 equipment and exhaust/ventilation fans. The left side (or equipment) outlets of the controller are normally "ON" until defeated when the right side outlets are activated.... More Details
Price: $215.71

CT-DH-4P Synchronized Cooling Thermostat/ Dehumidistat w Independent CO2 Outlet w Photosensor The CT-DH-4 and 4P is designed to be used with CO2 equipment, dehumidifiers, and exhaust fans. While it is similar to the CT-DH-3 it has the added feature of independent outlets for temperature and humidity control. It is ideally suited for use with dehum... More Details
Price: $215.71

CT-HT-2 Independent Cooling & Heating Thermostat/ 4 Outlets This controller features fully independent sensors for cooling and heating equipment. The cooling thermostat activates the left outlet of the controller and the heating thermostat activates the right outlet. If you require a tighter control of your temper... More Details
Price: $178.57