The Hydro-Cycle Timer is our most recent development in timing control. The Hydro-Cycle repeat cycle timer has solved the age old problem of accurate short cycle timing. Perfect for plant zone environments, reptile habitats or any other application requiring automatic short cycle switching. No programming required. Easy to operate. Microprocessor time counter with preset frequency and duration. The Hydro-Cycle timer has many uses. Only a few of them include: fogging or misting, spray stakes or drip system timing, air pumps, CO2 equipment and intake or exhaust fan control. The Hydro-Cycle has a preset interval and cycle time. Interval is the time between the "On" and "Off" cycles. The interval is preset for 4 minutes. Cycle is the length of time that a specific function or condition must be maintained. Cycle is preset for 60 seconds. Automatic reset feature allows function synchronizing with other system controls. Unplug the power cord for manual operation. The Hydro-Cycle timer utilizes a duplex cord cap which provides a combination plug and receptacle power cord design. Operates on 120 volts AC with 15 amp switching capacity. Automatic reset feature allows function synchronizing with other system controls. Turn the switch off and on again for manual operation. The HCT-1 timer utilizes a duplex cord cap which provides a combination plug and receptacle power cord design.

Image Gallery: