DiST testers are reliable, pocket-sized instruments that will give you quick and accurate readings of conductivity and TDS. This popular line of Dissolved Solids Testers have been redesigned to offer a host of improvements. The casing has been modified to provide increased strength, a better fit for holding and a large LCD for easy viewing. The graphite sensors provide better repeatability since they do not oxidize. The casing has been engineered to allow air bubbles to escape. The temperature sensor is exposed to provide faster response time. The HI 98301 (DiST 1) performs TDS measurements. If calibration is necessary, simply submerge the electrode tip into calibration solution and adjust the trimmer on the side of the tester. HI 98301 (DiST 1 with TDS factor = 0.5) is supplied with protective cap, screwdriver, batteries and instructions. Range 1999 ppm (mg/L)
Resolution 1 ppm (mg/L)
Accuracy 2% F.S.
TDS Factor 0.5
Calibration Solution HI 70032
Calibration manual, 1 point
Probe HI 73301
Temperature Compensation automatic, 0 to 50C (32 to 122F)
Battery Type / Life 4 x 1.5V / approx. 200 hours of continuous use
Environment 0 to 50C (32 to 122F); RH max 95%
Dimensions 175 x 41 x 23 mm (6.9 x 1.6 x 0.9")
Weight 95 g (3.4 oz.)
Item Specifications
Part Number: 131902
Dimensional Weight: 1 lbs
Additional Documents:
|
