Lumatek 1000 Watt Ballast 120/240 Volt - Hydrofarm Cord

Lumatek 1000 Watt Ballast 120/240 Volt - Hydrofarm Cord

This item is not available to order.
It may have been discontinued.

Feel free to browse our items available to order.

Item Details

The LK1000 1000W digital dimmable ballast for MH or HPS lamps

  • Electronic ballast for 1000W HPS or MH lamp
  • Voltage: 120V/240V 50/60Hz
  • Current: 8.92A/4.46A
  • Input power: 1075W
  • Output power: 1000W
  • Power factor: >0.99
  • Voltage range: 108 to 264V
  • THD: <8%
  • Lamp CCF: <1.7
  • Operating frequency: high frequency
  • No audible noise, no flicker
  • Env Temp: -25 to 50 degrees C (-13 to 122 degrees F)
  • Enclosure temperature rise (Δt): 35 degreees C (95 degrees F)
  • Env IP require: >IP23

Optional selectable dimming levels at 600W, 750W and 1000W levels. Boost your output 10% by switching to 1000SL.

Operates in 4 Modes:

1000 Watt SUPER LUMENS Mode:

  • Will run 1000 Watt bulb using 1010 Watts of electricity.
  • All bulbs running on 1000 Watt SUPER LUMENS Mode will use 1000 Watts of electricity and put out 1010 watts of light. (Example: 1000 Watt bulb used in 1000 Watt Mode, 1010 Watts used, 1010 Watt Light output)
Compatible Bulbs that can be run on 1000 Watt SUPER LUMENS Mode:
  • 1000 Watt Metal Halide (MH)
  • 1000 Watt High Pressure Sodium (HPS)

1000 Watt Mode:
  • Will run 1000 Watt bulb using 1000 Watts of electricity.
  • All bulbs running on 1000 Watt Mode will use 1000 Watts of electricity and put out 1000 watts of light. (Example: 1000 Watt bulb used in 1000 Watt Mode, 1000 Watts used, 1000 Watt Light output)
Compatible Bulbs that can be run on 1000 Watt Mode:
  • 1000 Watt Metal Halide (MH)
  • 1000 Watt High Pressure Sodium (HPS)

750 Watt Mode:
  • Will run 1000 or 750 Watt bulb using 750 Watts of electricity.
  • All bulbs running on 750 Watt Mode will use 750 Watts of electricity and put out 750 watts of light. (Example: 1000 Watt bulb used in 750 Watt Mode, 750 Watts used, 750 Watt Light output)
Compatible Bulbs that can be run on 750 Watt Mode:
  • 1000 Watt Metal Halide (MH)
  • 1000 Watt High Pressure Sodium (HPS)
  • 750 Watt High Pressure Sodium (HPS)

600 Watt Mode:
  • Will run 1000, 750 or 600 Watt bulb using 600 Watts of electricity.
  • All bulbs running on 600 Watt Mode will use 600 Watts of electricity and put out 600 watts of light. (Example: 1000 Watt bulb used in 600 Watt Mode, 600 Watts used, 600 Watt Light output)
Compatible Bulbs that can be run on 600 Watt Mode:
  • 1000 Watt Metal Halide (MH)
  • 1000 Watt High Pressure Sodium (HPS)
  • 750 Watt High Pressure Sodium (HPS)
  • 600 Watt High Pressure Sodium (HPS)

Features:
  • More lumens generated per watt of electricity consumed - Lumatek ballasts have increased efficiency over magnetic ballasts. They lose fewer watts from the power supply to the lamp. This is a power factor of 99%+. The high frequency output results in low power loss.
  • Fast start-up they reach full brightness quickly.
  • Completely silent.
  • Small compact design.
  • Produce less heat.
  • Cut-off circuitry cuts off when a short is detected for ultimate safety.
  • Fully interchangeable - Lumatek ballasts can light both HPS and MH bulbs.
  • 120/240 Volt.

Item Specifications
Item Number: 134714
Universal Product Code: 816356002441
Manufacturer: Lumatek

Home | Products | Learning Center | About Us | Returns & Refunds | Privacy | Testimonials | Contact | Login | View Cart | 

Copyright 2014 Greentrees Hydroponics