465 Cubic Foot per Minute Exhaust Blower. Exhaust blowers are used to move air out or into the grow room. To blow hot air out, mount the blower up high on the inside of the room and open a hole down low for cool air to come in. The air comes out the rectangular opening on the blower. The blower can also be mounted on the outside down low pushing air in. Fresh air is very important for a grow room indoors, without it the plants will suffer. Exhaust Blower 465 CFM, 115 volts, 2.90 amps, 334 watts. Exhaust opening: 8-1/2" x 4" with 1/2" flange.

Controlling heat in the grow room

• Industrial quality blowers.
  
• Powder coated steel enclosure.
  
• Made in the USA.
  
• Power supply cord included.

Item: Shaded Pole Blower
Type: Forward Curve, Direct Drive
Wheel Dia. (In.): 5 1/4
Wheel Width (In.): 6 7/8
CFM @ 0.000-In. SP: 465
CFM @ 0.100-In. SP: 428
CFM @ 0.200-In. SP: 396
CFM @ 0.300-In. SP: 352
CFM @ 0.400-In. SP: 305
CFM @ 0.500-In. SP: 227
CFM @ 0.600-In. SP: 125
Voltage: 115
Hz: 60/50
Phase: Single
Full Load Amps: 2.90/3.70
RPM: 1530
Bearing Type: Sleeve
Motor Type: Shaded Pole
Motor Enclosure: Open Dripproof
Thermal Protection: Automatic Reset
Conduit Box: No
Ambient Temp. (Deg. F): 104
Max. Inlet Temp. (Deg. F): 104
Inlet Dia. (In.): 4 9/16
Outlet Height (In.): 3 5/8
Outlet Width (In.): 8 1/6
Overall Height (In.): 12
Overall Width (In.): 9 1/4
Overall Depth (In.): 8 13/16
Mounting: All Position
Housing Finish: Baked on Gray Enamel
Housing Material: Steel
Agency Compliance: UL Component Recognized, CSA Ceritfied

Part Number: 248054
Warranty: 12 Months With Receipt
Guarantee: 30 Day Money Back With Receipt
Dimensional Weight: 15 lbs