Absolute total complete control of your grow room from up to 150 feet away without wires, the Hyperion 1 Wireless/Environmental/Lighting controller is the solution! Monitor & control the CO2, temperature and humidity during the day & night periods. Then add a fully functional lighting controller (via trigger cordsets) that includes a high temp shut-off, 15 min cool down with pre-set and custom lighting schedules. It even tells you when to change your light bulb. 15 Amps/120 Volts/ 60 Hz.
The Hyperion 1 Controller uses three modules: the remote sensor, master controller, and remote controller, to form a wireless control network
The Hyperion 1 is equipped with transceivers that operate in the non-licensed 2.4 GHz frequency band and are FCC (USA), IC (Canada), and ETSI (Europe) compliant. The remote sensor and remote controller communicate wirelessly and allow remote viewing of a room's environment All control parameters are changed over the wireless network via the user interface.
The Hyperion 1 remote sensor is equipped with CO2 , relative humidity, temperature, and light sensors. The room's environment is controlled by four relay outputs located on the master controller. These outputs are used to control ventilation fans, a dehumidification unit, a CO2 generator, or a CO2 regulator and a lighting controller trigger for lighting.
Separate Daytime and Nighttime control parameters are used to keep the room's environment at optimum growing conditions throughout a 24-hour period.
Includes Master Controller, Remote Controller and Remote Sensor.
Item Number: 140530
Universal Product Code: 849969002065
Manufacturer: Sunlight Supply
Manufacturer's Part Number: HGC702620
Brand: Titan Controls