Dayton 273 CFM Exhaust Blower

Dayton 273 CFM Exhaust Blower


265 Cubic Foot per Minute Exhaust Blower. Exhaust blowers are used to move air out or into the grow room. To blow hot air out, mount the blower up high on the inside of the room and open a hole down low for cool air to come in. The air comes out the square opening on the blower. The blower can also be mounted on the outside down low pushing air in. Fresh air is very important for a grow room indoors, without it the plants will suffer. Exhaust Blower 265 CFM, 115 volts, 1.86 amps, 214 watts. Exhaust opening: 4-1/2" x 4" with 1/2" flange.

Controlling heat in the grow room

  • Industrial quality blowers.
  • Powder coated steel enclosure.
  • Made in the USA.
  • Power supply cord included.

Item: Shaded Pole Blower
Type: Forward Curve, Direct Drive
Wheel Dia. (In.): 5 1/4
Wheel Width (In.): 2 7/8
CFM @ 0.000-In. SP: 265
CFM @ 0.100-In. SP: 250
CFM @ 0.200-In. SP: 232
CFM @ 0.300-In. SP: 212
CFM @ 0.400-In. SP: 184
CFM @ 0.500-In. SP: 135
Voltage: 115
Hz: 60/50
Phase: Single
Full Load Amps: 1.95/1.86
RPM: 1610
Bearing Type: Sleeve
Motor Type: Shaded Pole
Motor Enclosure: Open Dripproof
Thermal Protection: Automatic Reset
Lead Length (In.): 6
Conduit Box: Yes
Ambient Temp. (Deg. F): 104
Max. Inlet Temp. (Deg. F): 104
Inlet Dia. (In.): 4 5/8
Outlet Height (In.): 3 11/16
Outlet Width (In.): 4 1/8
Overall Height (In.): 9 7/8
Overall Width (In.): 7 9/16
Overall Depth (In.): 8 7/8
Mounting: All Position
Housing Finish: Baked Gray Enamel
Housing Material: Steel
Agency Compliance: UL Component Recognized, CSA Ceritfied

Item Number: 248053
Universal Product Code: 638104001496
Manufacturer: Dayton
Manufacturer's Part Number: 1TDR3

This item is not available to order. Browse our items available to order.

Related Items

Home | Products | Learning Center | Returns & Refunds | Shipping | Privacy | Testimonials | Contact | Login | View Cart |

Copyright 1992-2020 Greentrees Hydroponics
2180 Chablis Court, Suite 108, Escondido, California 92029